PET filament for the Bambu Lab P1S
Back to the Bambu Lab P1S filament guide. Status columns come from Bambu's material table (category-level, not brand-tested).
| Product | Brand | Category | Printer status | AMS status | Nozzle °C | Spool fit |
|---|---|---|---|---|---|---|
| Bambu Lab PET-CF | Bambu Lab | PET-CF/GF | Recommended | Not Compatible | 260–290 | unknown (no spool dimensions in source data) |
| ELEGOO PET-CF | ELEGOO | PET-CF/GF | Recommended | Not Compatible | 260–290 | unknown (no spool dimensions in source data) |
| Polymaker PET CF | Polymaker | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
| QIDI Tech PET-CF | QIDI Tech | PET-CF/GF | Recommended | Not Compatible | 280–320 | unknown (no spool dimensions in source data) |
| QIDI Tech PET-GF | QIDI Tech | PET-CF/GF | Recommended | Not Compatible | 260–320 | unknown (no spool dimensions in source data) |
| Siraya Tech Fibreheart PET-CF | Siraya Tech | PET-CF/GF | Recommended | Not Compatible | 280–320 | unknown (no spool dimensions in source data) |
| Siraya Tech Fibreheart PET-GF | Siraya Tech | PET-CF/GF | Recommended | Not Compatible | 300–320 | unknown (no spool dimensions in source data) |
| Spectrum PET CF15 | Spectrum | PET-CF/GF | Recommended | Not Compatible | 245–270 | unknown (no spool dimensions in source data) |
| Tectonic 3D PET CF | Tectonic 3D | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
| TINMORRY PET GF | TINMORRY | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
| TINMORRY Matte PET CF | TINMORRY | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
PET on the Bambu Lab P1S: sort by heat resistance (datasheet values only)
Only the 1 of 11 products with values copied from a manufacturer datasheet are listed. Test methods differ between brands; see each product page for the method and caveats. Click a column heading to sort.
| Product | Brand | HDT method | Source | ||||
|---|---|---|---|---|---|---|---|
| Bambu Lab PET-CF | Bambu Lab | 205 | 182 | 75 | 226 | ISO 75 | TDS |
Affiliate disclosure: once this site is live, some links like the ones below may be affiliate links, meaning we could earn a commission if you buy through them, at no extra cost to you. That would not change which data we show. In this prototype, no affiliate program has been joined and these are placeholder links.