Bambu Lab PA6-CF
Brand: Bambu Lab · Material: PA6
Specifications (each value linked to its source)
| Field | Value | Source | Confidence | Checked |
|---|---|---|---|---|
| Brand | Bambu Lab | Open Filament Database | community-database | |
| Material (database category) | PA6 | Open Filament Database | community-database | |
| Filament diameter | 1.75 mm | Open Filament Database | community-database | |
| Diameter tolerance (±) | 0.03 mm | Open Filament Database | community-database | |
| Density | 1.09 g/cm³ | Open Filament Database | community-database | |
| Nozzle temp, min | 260 °C | Open Filament Database | community-database | |
| Nozzle temp, max | 290 °C | Open Filament Database | community-database | |
| Bed temp, min | 80 °C | Open Filament Database | community-database | |
| Bed temp, max | 100 °C | Open Filament Database | community-database | |
| Net filament weight(s) | 500, 1000 g | Open Filament Database | community-database | |
| Color variants listed | 1 | Open Filament Database | community-database | |
| Technical data sheet (TDS) | Manufacturer document (link from database) | Open Filament Database | community-database | |
| Safety data sheet (SDS) | Manufacturer document (link from database) | Open Filament Database | community-database |
Heat resistance (manufacturer datasheet)
| Property | Value | Test method (as printed) | Source | Checked |
|---|---|---|---|---|
| Heat deflection temperature (HDT) at 0.45 MPa | 186 °C | ISO 75 | Manufacturer TDS | |
| Heat deflection temperature (HDT) at 1.8 MPa | 164 °C | ISO 75 | Manufacturer TDS | |
| Glass transition temperature (Tg) | 68 °C | DSC, 10 °C/min | Manufacturer TDS | |
| Vicat softening temperature | 212 °C | not stated | Manufacturer TDS |
Caveat: these are the manufacturer's typical lab values from its technical data sheet; they were not measured by this site. Results depend on test method, load, print orientation, specimen preparation and annealing, so values from different brands are not directly comparable unless the method matches. A heat deflection value is not a safe continuous-use temperature for a printed part.
Specimen note from the datasheet: specimens annealed and dried at 80 °C for 12 h before testing.[src]
Printer requirements
| Requirement | Value | Basis | Source | Checked |
|---|---|---|---|---|
| Enclosure | Enclosed printer recommended | Bambu category PA-CF/GF | Bambu Lab wiki | |
| Hardened nozzle | Hardened steel nozzle required | Bambu category PA-CF/GF: hardened steel nozzle Required | Bambu Lab wiki |
Derived from the product's Bambu category and the database's abrasive/fibre tags. A tag in the database overrides a "Not Required" category rating, to stay on the cautious side.
Bambu Lab printer compatibility (by material category)
This product's database category maps to the PA-CF/GF row of Bambu's material table. Bambu's table rates material categories, not individual brands, so treat this as a category-level guide.
| Printer | Printer type (per Bambu) | Status for this category | Feeder | Feeder status | Spool-size fit |
|---|---|---|---|---|---|
| Bambu Lab A1 mini | open-frame | Not Recommended | AMS lite | Compatible (Bambu product line) | unknown (no spool dimensions in source data) |
| Bambu Lab A1 | open-frame | Not Recommended | AMS lite | Compatible (Bambu product line) | unknown (no spool dimensions in source data) |
| Bambu Lab P1S | enclosed | Recommended | AMS | Compatible (Bambu product line) | unknown (no spool dimensions in source data) |
| Bambu Lab X1 Carbon (X1C) | enclosed | Recommended | AMS | Compatible (Bambu product line) | unknown (no spool dimensions in source data) |
Spool-size fit compares this product's spool dimensions from the Open Filament Database against Bambu's stated limits (AMS, AMS lite). "Unknown" means the source data has no spool dimensions for this product.
Affiliate disclosure: once this site is live, some links like the ones below may be affiliate links, meaning we could earn a commission if you buy through them, at no extra cost to you. That would not change which data we show. In this prototype, no affiliate program has been joined and these are placeholder links.
See an error? This prototype has no submission form yet. Corrections to the underlying data can be made upstream at the Open Filament Database.