extrudr DuraPro ABS
Brand: extrudr · Material: ABS
Specifications (each value linked to its source)
| Field | Value | Source | Confidence | Checked |
|---|---|---|---|---|
| Brand | extrudr | Open Filament Database | community-database | |
| Material (database category) | ABS | Open Filament Database | community-database | |
| Filament diameter | 1.75, 2.85 mm | Open Filament Database | community-database | |
| Diameter tolerance (±) | 0.02 mm | Open Filament Database | community-database | |
| Density | 1.04 g/cm³ | Open Filament Database | community-database | |
| Nozzle temp, min | 230 °C | Open Filament Database | community-database | |
| Nozzle temp, max | 260 °C | Open Filament Database | community-database | |
| Bed temp, min | 90 °C | Open Filament Database | community-database | |
| Bed temp, max | 110 °C | Open Filament Database | community-database | |
| Net filament weight(s) | 750, 2000, 5000, 10000 g | Open Filament Database | community-database | |
| Spool material | plastic | SpoolmanDB | community-database | |
| Color variants listed | 9 | Open Filament Database | community-database | |
| Technical data sheet (TDS) | Manufacturer document (link from database) | Open Filament Database | community-database | |
| Safety data sheet (SDS) | Manufacturer document (link from database) | Open Filament Database | community-database | |
| Nozzle temp (SpoolmanDB value) | 250 °C | SpoolmanDB | community-database | |
| Bed temp (SpoolmanDB value) | 110 °C | SpoolmanDB | community-database |
Heat resistance (manufacturer datasheet)
| Property | Value | Test method (as printed) | Source | Checked |
|---|---|---|---|---|
| Vicat softening temperature | 92 °C | not stated | Manufacturer TDS |
Caveat: these are the manufacturer's typical lab values from its technical data sheet; they were not measured by this site. Results depend on test method, load, print orientation, specimen preparation and annealing, so values from different brands are not directly comparable unless the method matches. A heat deflection value is not a safe continuous-use temperature for a printed part.
Data note: TDS gives "HDT/B ASTM D648 85 °C" without stating the load, so it is not assigned to a load column here.[src]
Printer requirements
| Requirement | Value | Basis | Source | Checked |
|---|---|---|---|---|
| Enclosure | Enclosed printer recommended | Bambu category ABS | Bambu Lab wiki | |
| Hardened nozzle | Not required | Bambu category ABS: Not Required; no abrasive tag in the database | Bambu Lab wiki |
Derived from the product's Bambu category and the database's abrasive/fibre tags. A tag in the database overrides a "Not Required" category rating, to stay on the cautious side.
Bambu Lab printer compatibility (by material category)
This product's database category maps to the ABS row of Bambu's material table. Bambu's table rates material categories, not individual brands, so treat this as a category-level guide.
| Printer | Printer type (per Bambu) | Status for this category | Feeder | Feeder status | Spool-size fit |
|---|---|---|---|---|---|
| Bambu Lab A1 mini | open-frame | Not Recommended | AMS lite | Not Recommended | unknown (no spool dimensions in source data) |
| Bambu Lab A1 | open-frame | Not Recommended | AMS lite | Not Recommended | unknown (no spool dimensions in source data) |
| Bambu Lab P1S | enclosed | Recommended | AMS | Compatible | unknown (no spool dimensions in source data) |
| Bambu Lab X1 Carbon (X1C) | enclosed | Recommended | AMS | Compatible | unknown (no spool dimensions in source data) |
Spool-size fit compares this product's spool dimensions from the Open Filament Database against Bambu's stated limits (AMS, AMS lite). "Unknown" means the source data has no spool dimensions for this product.
Affiliate disclosure: once this site is live, some links like the ones below may be affiliate links, meaning we could earn a commission if you buy through them, at no extra cost to you. That would not change which data we show. In this prototype, no affiliate program has been joined and these are placeholder links.
[PLACEHOLDER affiliate link] extrudr DuraPro ABS (placeholder)
See an error? This prototype has no submission form yet. Corrections to the underlying data can be made upstream at the Open Filament Database.